- Contact Person : Ms. Jau Anny
- Company Name : Xiamen Kuanyi Electronic Technology Co., Ltd.
- Tel : 86-592-6686182
- Fax : 86-592-6156976
- Address : Fujian,Xiamen,UNIT 615A, 6/F, ZHONG TIE FORTUNE PLAZA NO.398 JIAHE ROAD, XIAMEN , FUJIAN CHINA
- Country/Region : China
- Zip : 361009
Pressure Sensor
pressure senor
SPECIFICATION
BASIC RANGEMPa | -0.1 | 0.1 | 0.2 | 0.35 | 0.7 | 1.0 | 2.0 | 3.5 | 7 | 10 | 20 | 35 | 60 | 100 |
OVERPRESSUREMPa | -0.1 | 0.15 | 0.3 | 0.5 | 1.0 | 1.5 | 3.0 | 5.0 | 10 | 15 | 30 | 50 | 90 | 110 |
* The range between basic range will be made by basic range shrink.* Range shrink proportion: min. 1/5 basic range.* It is possible to offer vacuum test product.
MIN. | TYP. | MAX. | UNIT | NOTE | |
TOTAL ACCURACY(Lin.+Hys.+Rep.+Zero Temp. error+ sensitivity error) | 0.05 | 0.1 | 0.25 | %FS | |
LONG TERM STABILITY | 0.2 | %FS/12 months | |||
COMP. TEMPERATURE | -10~80 | ||||
OPERATION/STORAGE TEMPERATURE | -40~80 | ||||
SUPPLY | 8~28(RS485)/12~30(HART) | VDC | |||
OUTPUT | 4~20 | mADC | |||
RS485/HART | |||||
LOAD ABILITY | 4~20mADC, (U-12V)/0.02A | Ω | |||
RS485, possible to connect 99 transmitters | |||||
ELECTRONIC CONNECTION | DIN43650 4-pin (RS485 plug inside of housing) | ||||
7-pin plug; (suitable for RS485 output ) | |||||
7.5mm shield cable | |||||
INSULATION | 100MΩ/50V | ||||
ENDURANCE | 1X107 cycles, 0~100%FS, @25 | ||||
VIBRATION | 20g,20~5000Hz | ||||
SHOCK | 20g 11ms | ||||
PROTECTION | IP65(B1,B2) IP63(B3) | ||||
PARTS CONTACT WITH MEDIUM | DIAPHRAGM | SS 316L | |||
HOUSING | stainless steel 1Cr18Ni9Ti | ||||
O-ring | Viton | ||||
WEIGHT | ~160g | ||||
Total Accuracy: Lin.+Hys.+Rep.+(-10~80)Temp. error.Other demands to contact factory.
CONSTRUCTION
OPTION
Setonline software:To read out the basic information (range, Comp. Temp. range, version), and indicate actual pressure; to set Zero, analog output and address.
ORDER GUIDE
MPM4730 | Intelligent Pressure Transmitter | |||||
Ragne | kPa or MPa | |||||
[0~X]kPa/MPa | -0.10~0.01100MPA,X | |||||
Code1 | Output | |||||
E | 4~20mADC | |||||
R4 | RS485 output | |||||
H | HART Protocal Communications | |||||
Code2 | Construction Material | |||||
Diaphragm | Pressure port | Housing | ||||
22 | 316 ss | ss | ss | |||
Code3 | ||||||
B1 | 4-pin plug | |||||
B2 | Cable length:1.5m | |||||
B3 | 7-pin plug | |||||
P | flush diaphragm(range:-0.10~0.17MPa,C3) | |||||
C1 | M20x1.5 male,face type seal | |||||
C3 | G1/2 male | |||||
C4 | G1/4 female | |||||
C5 | M20x1.5 male | |||||
G | Gauge | |||||
S | Sealed Reference | |||||
A | Absolute | |||||
MPM4730 | [0~100kPa] | ER4 | 22 | B3C1G | ||
Pressure Sensor
